This machine is used to weld the Bridgewire to the Igniter Header. Headers are bowl fed from a 12” CCW feeder bowl through an inline feeder track to a dead track where the orientation of the isolated pin is checked. Headers are then placed into a height check station to verify the dimensions of the header using a dual head parts placer. Simultaneously headers are moved from the height check station to an inline feeder track and into a part orient and load station dead track. Headers are oriented as required and loaded up into a nest on a 12 station cam driven index table. Proper header orientation is verified and the headers are Vision Mapped for exact position and orientation and indexed to the weld station. At the weld station bridgewire is spool fed and tensioned into a 16 position servo driven wire retainer turret.