The operator manually loads dual tube inflator cups into a nest on a 16 position indexed dial plate. A barcode label on the inflator is read and the serial number is validated with the supervisory production data tracking system. The empty inflator is weighed to determine the tare weight of the part. Dual pellet feeders load pre-weighed portions of pellets into each tube. After each portion is loaded the weight is checked and reported to the data tracking system. Filled inflator cups are automatically transferred to a nest on a 2nd 16 position indexed dial plate where manually loaded and conveyor fed pouched cups are tested for weight and good pouched cups are placed into the inflator tubes. Reject pouched cups are offloaded by a chute into a reject part bin.