This machine is used to weld the Can to the Header S/A after final powder load and consolidation. The complete Igniter assemblies generally come directly from the Output Powder Loader. The machine is built around an 8 station cam driven index table. The Igniter S/A's are loaded with the pins facing up into the index table fixtures by a parts placer. The part nest is a custom made rotating collet that holds the Igniter S/A and also acts as a heat sink to pull the heat away from the part as it is welded. The Igniter S/A's are fed from a vibratory inline feeder that transports the parts from the Output Powder Loader.  The last part is cross shuttled and loaded into the fixture by a pneumatic pick and place mechanism.