This machine is used to fill a can with an Output Charge of powder by volume and insert a Header S/A.  Typically the Header S/A comes to the machine directly from the Ignition Charge Loader with the Ignition Charge in place. With some Igniter designs the Header S/A may come directly from the Bridge Wire machine when there is no Charge Sleeve.  This machine is also available with two Powder Load stations for Igniter designs requiring large loads or two types of powder.

The machine is built around a 16 station cam driven index table.  The cans are loaded open side up into fixtures.  The can nest is simply a hole if the can has a shoulder to hang from, or a hole with a removable pin for the can to sit on if there is no shoulder.