This machine is used to attach the Charge Sleeve to the Header Sub-Assembly in a typical Igniter.  The Header S/A comes to the machine with two pins and a Bridge Wire. A 34 station walking beam is used to progress the parts through the machine.  The walking beam is driven by cams to provide controlled motion of the parts through the machine.  The Header S/A's are fed from a vibratory inline feeder which transports the oriented parts from the Bridge Wire Machine to  the first station of the walking beam.  At this station a cross shuttle transfers the Header S/A from the feeder to the walking beam track where the walking beam can take it away.  The walking beam has a short transfer stroke (0.75 Inches) to allow high speeds, so there are several idle stations throughout the process.